|
|
| (28 intermediate revisions by the same user not shown) |
| Line 3: |
Line 3: |
| | <onlyinclude> | | <onlyinclude> |
| | | | |
| − | This section is available since [[SomEx|1.1.2.1]]. | + | This section is available since [[SomEx|1.1.2.1]]. Refer to [[SomEx/list of numbers]]. |
| | | | |
| − | Extensions in this section take the form of "numbers" capital N (or Numbers) that can appear inside of the calculator like formulas accepted by [[#number]] extensions. Be wary that a few odd number-like extensions exist that are not in fact ''#numbers'' because an additional qualification (as of 1.1.2.1) for numbers is the extension must be able to be continuously reevaluated. If it cannot it is best to think of it as a strict numerical code or something else altogether. | + | Extensions in this section take the form of custom [[#number]]s which can then be used to assign values to extensions that accept "numbers". Often these extensions will end with _factor or _multiplier. If their numbers accept input parameters they end with _quantifier. An extension that ends with _identifier accepts a positive whole 24bit number or a packed series of numbers setup with [[SomEx/list_of_numbers#id|id]]. Such extensions may or may not accept input parameters. |
| | | | |
| − | Numbers make the Ex.ini file programmable, and on the surface numbers can appear more powerful than Sword of Moonlight's native event system. For sure numbers are a more complete system, however the event system represents a true digital computer; whereas the easiest way to understand "numbers" is to picture a cheap old fashioned pocket calculator.
| + | The name of an extension in this section is limited to a 30 character name, a subscript in the range of [0-65534], and a 30 character label, all separated by a single underscore (_). A name is required. If the subscript is unspecified then 0 is assumed. Labels cannot include equal signs (=) and cannot be applied when the subscript is omitted, as the subscript separates the name from the label. |
| | | | |
| − | *'''Extension assignment'''
| + | A trailing underscore (_) is interpreted as an incomplete label. The value to the right of the equal sign (=) is taken to be the label. Just the same a number can be specified without being assigned to. Doing so will simply apply a label. It is not necessary to declare numbers in advance. Therefore applying labels is the only reason to omit the assignment. Numbers are not assigned in any particular order accept where [[SomEx/list_of_numbers#_$|_$]] appears. |
| | | | |
| − | When assigning an expression to a Number in the [[#Number]] (or this) section there are between one-and-three parts to the left of the equal (=) sign and either an expression or a label to the right. When assigning to a regular number extension in any other section the expression part is the same except that the expression cannot refer to the number being assigned to (as a number is not a Number)
| + | All-lowercase names for numbers are reserved. Both for the numbers of [[SomEx/list of numbers]] and future extensions of the [[#Number]] section. This does not mean you cannot use such names, however you should think twice before doing so. Furthermore all symbolic [[Wikipedia:Unicode|Unicode]] character codes are reserved. In other words, the names of custom numbers should be limited to Unicode script only. These restrictions do not apply to labels. However labels are advised to avoid the = and [] characters, however [ and ] can be used if matched and in that order. |
| | | | |
| − | When assigning a Number to itself, or referring to that number in the assigned expression, the Number is actually duplicated and kept as a backup, appearing only within the assigned expression. Wherever else the Number appears its current assignment is given priority.
| + | '''Note: that it would be ideal if where multiple Ex.ini files are in use assignment is encapsulated, or occurs before moving onto the next file by default. However this behavior has not yet been put into effect as of [[SomEx|1.1.2.1]].''' |
| − | | |
| − | The three parts to the left of the equal sign take the form of name_0_label. Where name is name of the Number as it appears in expressions. And _0 is a zero-based positive integer owing to the fact that each Number is truly a collection of parts, or a battery of numerical expressions, each defaulting to NaN or "not-a-number". If _0 is absent then 0 is assumed and _label cannot be present as it would run into name. After the underscore (_) in _label anything may appear up to 30 Unicode characters to be used as a label for that part. In other words Sword of Moonlight's "counters" labels and all can fit into a single Number in battery form.
| |
| − | | |
| − | For readability it is recommended that _label not include spaces. However there is an alternative way to assign labels where only the underscore (_) of _label appears and the label itself is written to the right of the equal (=) sign. This approach can further aid readability by keeping the equal signs lined up one line after the next.
| |
| − | | |
| − | Each part is accessed with a square bracket ([]) notation. For example x[1] for the second part of x. Or if x[1] is labeled, x[x[1]'s label], though you <u>must</u> be careful with [ and ] inside of labels so that they always appear in nested pairs so not to be confused with the end of the label. Labels can even be combined with computed offsets like so: x[groceries][+1].
| |
| − | | |
| − | Functions hold default parameters and labels in the parts just above them. So f[1] holds the default parameter for the first argument of the function f (refer to the system number _ below for input parameters access within a function)
| |
| − | | |
| − | *'''Mathematical symbols'''
| |
| − | | |
| − | In addition to the familiar plus (+) minus (-) multiplication (*) and division (/) operators (using standard infix association) there are exponent (^) for squared, cubed, etc. and complex square and Nth root by way of fractional "powers" and grouping parentheses (()) following algebraic order of operations and absolute value (||) vertical bars.
| |
| − | | |
| − | Numbers can be prefixed by minus (-) to be made negative or plus (+) to note as positive. Note that + can actually be useful inside of square brackets ([]) to distinguish between numbers and labels. Also care must be taken to ensure that numbers are not interpreted as a series or sequence. To do so operators must be surrounded by spaces on both sides or appear directly in front of a number or appear between numbers without any extra space (commas and semicolons can be added to note the continuation of series)
| |
| − |
| |
| − | Functions make use of z = f(x,y) notation, read f of x and y yields z, where f is the name of the Number and x and y are parameters of its function.
| |
| − | | |
| − | *'''Branching symbols'''
| |
| − | | |
| − | So-called if-then-else (if not otherwise) functionality is achieved by the ternary, or 3 part, x?y:z pattern where x is the predicate, and y is number chosen if x is nonzero, and z is the number chosen if x is zero (refer to _E below for the definition of zero)
| |
| − | | |
| − | *'''Built in functions'''
| |
| − | | |
| − | Logical functions include and(...,n) nand(...,n) or(...,n) nor(...,n) xor(x,y) xnor(x,y) and not(x[,y]) where the second parameter of not is optional. If present y is subtracted from x. These functions always yield zero (0) or one (1) "true or false" numbers.
| |
| − | | |
| − | Inequality functions include neg(x[,y]) where y like above is optional and subtracted from x. If x is less than zero (0) neg is one (1) or else zero. In other words neg is one if x is negative. If not zero. Neg is not-equal-nor-greater. Be wary that complex numbers are never negative according to neg.
| |
| − | | |
| − | Identity functions include nan([x]) and inf([x]) where both are one (1) if x is NaN, or not-a-number, or infinity (∞) respectively. Zero (0) alternatively. The parameter x is optional. If omitted the parentheses should be omitted also. Instead of one and zero the functions yield the literal numbers NaN (not really a number but a value nonetheless) and infinity.
| |
| − | | |
| − | Utility functions include int(x) discarding the fractional part of a number, and mod(x,y) yielding the remainder of x divided by y, and min(x,y) and max(x,y).
| |
| − | | |
| − | Complex functions include x(x) and y(x) and iy(x) where x yields the "real" part of a number, y the "imaginary" part of a number as a "real number", or a number that is not complex, and iy the "imaginary" part of a number as a complex number, or a "purely imaginary" number.
| |
| − | | |
| − | Supplemental functions include pow(x,y) abs(x) and if(x,y,z) where pow is equivalent to x^y and abs is equivalent to |x| and if is equivalent to x?y:z.
| |
| − | | |
| − | Additional functions include exp(x) and log(x[,y]) where y is base-e (2.71828) if omitted. And all of the standard trigonometric functions, sin(x) cos(x) and so forth (a complete list is forthcoming.)
| |
| − | | |
| − | *'''Built in numbers'''
| |
| − | | |
| − | The numbers pc and npc hold stats for the player character and non player character respectively. Note that these may change (and not always be available) in any given context. And c holds the values of the game's event "counters". Bear in mind that number expressions cannot change these values but the values themselves are subject to change.
| |
| − | | |
| − | The number r generates random positive integers between 0 and one less than the integer ID accessed. So that r[2] can be 0 or 1. r[0] or simply r makes use of the widest range possible.
| |
| − | | |
| − | *'''System numbers'''
| |
| − | | |
| − | _ always refers to the parameters of a function. _[0] holds the number itself. Note that technically all numbers are functions of themselves. _[1] holds the first parameter, _[2] the second, and so on. Note that _[0] or simply _ is off limits outside of the [[#Number]] section (at least until it is decided otherwise.)
| |
| − | | |
| − | _E, or Epsilon, is a fractional number so small to only be meaningful as rounding error. If the absolute value of a number is less than _E then it is considered to be zero (0) when comparing for equality.
| |
| − | | |
| − | _WALK, _DASH, _TURN refer to the player character speeds as defined by the game's Sys.dat file.
| |
| − | | |
| − | *'''Shorthand notation'''
| |
| − | | |
| − | Inside of expressions the number c[2] can be written 2c. However c[intro] and c[1+2] won't work. One becomes introc (another number altogether) and 1+2c, or c[2]+1 (unless that was what you wanted.)
| |
| − | | |
| − | When numbers are not "glued" together by one of the basic mathematical or branching symbols they are treated as numbers in a series. When assigning a series to a number the second number in the series is assigned to the number just above it and so on so that ''n_0 = 1 2'' assigns 1 to n_0 and 2 to n_1 (note that n_0 = 1 -2 is a series while 1 - 2 and 1-2 are not.)
| |
| | | | |
| | </onlyinclude> | | </onlyinclude> |
This section is available since 1.1.2.1. Refer to SomEx / list of numbers.
Extensions in this section take the form of custom #numbers which can then be used to assign values to extensions that accept "numbers". Often these extensions will end with _factor or _multiplier. If their numbers accept input parameters they end with _quantifier. An extension that ends with _identifier accepts a positive whole 24bit number or a packed series of numbers setup with id. Such extensions may or may not accept input parameters.
The name of an extension in this section is limited to a 30 character name, a subscript in the range of [0-65534], and a 30 character label, all separated by a single underscore (_). A name is required. If the subscript is unspecified then 0 is assumed. Labels cannot include equal signs (=) and cannot be applied when the subscript is omitted, as the subscript separates the name from the label.
A trailing underscore (_) is interpreted as an incomplete label. The value to the right of the equal sign (=) is taken to be the label. Just the same a number can be specified without being assigned to. Doing so will simply apply a label. It is not necessary to declare numbers in advance. Therefore applying labels is the only reason to omit the assignment. Numbers are not assigned in any particular order accept where _$ appears.
All-lowercase names for numbers are reserved. Both for the numbers of SomEx / list of numbers and future extensions of the #Number section. This does not mean you cannot use such names, however you should think twice before doing so. Furthermore all symbolic Unicode character codes are reserved. In other words, the names of custom numbers should be limited to Unicode script only. These restrictions do not apply to labels. However labels are advised to avoid the = and [] characters, however [ and ] can be used if matched and in that order.
Note: that it would be ideal if where multiple Ex.ini files are in use assignment is encapsulated, or occurs before moving onto the next file by default. However this behavior has not yet been put into effect as of 1.1.2.1.
